- 7%

G.SKILL Ripjaws V Series 32GB DDR4 3600

Original price was: $56.99.Current price is: $52.99.

(8 customer reviews)
Last updated on November 7, 2024 10:31 pm
0
Add to compare

Highest Price
$67.99 Newegg.com
June 10, 2024
Lowest Price
$52.99 Newegg.com
October 18, 2024
Current Price
$52.99 Newegg.com
November 8, 2024
Since May 14, 2024

Didn't find the right price? Set price alert below

Set Alert for Product: G.SKILL Ripjaws V Series 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Intel XMP 2.0 Desktop Memory Model F4-3600C18D-32GVK - $52.99

Specification: G.SKILL Ripjaws V Series 32GB DDR4 3600

Product
Brand

Model

F4-3600C16D-32GVKC

Series

Ripjaws V Series

Product Type
Type

Desktop

Specification
Best Seller Ranking

#8 in Desktop Memory

Voltage

1.35V

Features

Extreme performance DDR4 memory designed for gaming and PC enthusiastsOptimized compatibility with DDR4-compatible Intel Core platformsSleek and stylish aluminum heatspreader designIntel XMP 2.0 supportUltra-high capacity 16GB modules

Heat Spreader

Yes

Color

Charcoal

Chipset

Intel XMP 2.0

Multi-channel Kit

Dual Channel Kit

BufferedRegistered

Unbuffered

ECC

No

Timing

16-19-19-39

CAS Latency

16

Speed

DDR4 3600 (PC4 28800)

Type

288-Pin DDR4 SDRAM

Capacity

32GB (2 x 16GB)

Date First Available

October 14, 2019

Photos: G.SKILL Ripjaws V Series 32GB DDR4 3600

8 reviews for G.SKILL Ripjaws V Series 32GB DDR4 3600

5.0 out of 5
8
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Anonymous

    Pros: My i9-7980XE jumped from 992 GFLOPS to 1,119 GFLOPsS with this memory. Cons: The MSI and ASRock motherboards did not set XMP values correctly and performance was poor. Not sure if it was bad values in the XMP profile but it was an issue on both motherboards. I manually entered the CAS and volts in and all was good. Very important to set the volts at 1.35, made a huge difference.

    Helpful(0) Unhelpful(0)You have already voted this
  2. Anonymous

    Pros: Runs at 3200MHZ smoothly on my Ryzen 7 2700x and Crosshair VII hero motherboard. Perfect for the price. Cons: You gotta pay for it. Overall Review: I did write a review giving one egg to this product because of my lack of knowledge. Apparently, I put the sticks in the A1/B1 DImm slots and I was supposed to put it in the A2/B2 slots. after correcting that mistake, my ram worked perfectly at the rated speed. I apologize to the G.Skill team for unfairly giving this product one egg for a…

    Helpful(0) Unhelpful(0)You have already voted this
  3. Adam P.

    Pros: – Ram hit its XMP ratings out of the box. – Currently running on standard XMP voltage @ 1.35 volts, 3600 Mhz 17-19-19-39 timings. – All secondary tightened. Most tertiary tightened. – AIDA 64, read 52369, write 55457, copy 49620, Latency 49.8 – Will hit CAS 16 @ 3600 MHz with 1.42v – Memory is Hynix CJR – Memtest stable to over 10,000% – Slightly shorter than the TridentZ series for those with air coolers – No stupid RGB -As noted below the first pair came with one bad stick, would not…

    Helpful(0) Unhelpful(0)You have already voted this
  4. Ovidiu P.

    Pros: – Works at 3200 MHz. – Good latency. – Works well with AMD x570. – No LED and other decorative nonsense. I want memory chips, not a Christmas tree. Cons: – None. Overall Review: Very happy with these chips so far.

    Helpful(0) Unhelpful(0)You have already voted this
  5. Benjamin H.

    Overall Review: Remember that 3200 MHz is not a JEDEC certified frequency. This means that in order to get the full advertised 3200 MHz speed, you have to go into your motherboard BIOS settings and turn on XMP 2.0, which will automatically fix the timings and voltage for your RAM. If you don’t do this, the RAM will run at about 2132 MHz. You can verify it worked in the BIOS screen or Windows Task Manager (Performance > Memory).

    Helpful(0) Unhelpful(0)You have already voted this
  6. Anonymous

    Pros: Using this RAM with a Ryzen 9 3900x and ASRock X570 Steel Legend Wifi. On first boot was running at 2133 Mhz but once I enabled XMP it ran at 3600 Mhz with 16-19-19-39 timings. Fits under the massive Noctua NH-D15 cooler too Cons: None Overall Review: Good price and works perfectly! Would definitely buy again

    Helpful(0) Unhelpful(0)You have already voted this
  7. Adam B.

    Pros: Booted with default D.O.C.P settings without issue. Cons: Dual rank means timings won’t be as tight as single rank. Overall Review: Pairing these sticks with a 3600X on an ASUS TUF X570 board. These are Hynix DJR dual rank sticks. I was able to use version the DRAM Calculator for Ryzen (v1.7.3) to tighten the timings with SAFE settings. My latency is ~69ns in tests. tCL: 16 tRCDWR: 16 tRCDRD: 19 tRP: 21 tRAS: 36 tRC: 58 tRRDS: 6 tRRDL: 8 tFAW: 34 tWTRS: 4 tWTRL: 12 tWR: 24 tRDRD SCL: 5…

    Helpful(0) Unhelpful(0)You have already voted this
  8. Anonymous

    Pros: – Setup was easy: increase the voltage to 1.35, load XMP profile – Works without issue at rated speed and timings – No RGB Cons: No cons Overall Review: Running 64GB of this on a MSI MEG X570 ACE with a 3900x. Couldn’t be happier. **** Update 7/18/20 **** I’ve been running 4 sticks of these for over five months. 3800 16-19-19-19-36. MemTest86 Pro stable @ four passes. AIDA64 R / W / C / L: 58898 / 56532 / 63215 / 67. Roughly 7% / 8% / 9% / 7% increase over XMP, ymmv. DRAM: 1.41v SOC:…

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    G.SKILL Ripjaws V Series 32GB DDR4 3600
    G.SKILL Ripjaws V Series 32GB DDR4 3600

    Original price was: $56.99.Current price is: $52.99.

    hollowTag.
    Logo
    Register New Account

    Welcome!

    Log in, or create an account and become a member today.

    Compare items
    • Total (0)
    Compare
    0